Towers along Main Street, the office floors above City Creek Center, and the medical high-rises near the University of Utah all share the same problem: curtain-wall glass that turns every summer afternoon into a cooling crisis. A Salt Lake City high-rise can see dozens of consecutive days above 90°F between June and September, and west-facing glass at elevation receives punishing solar gain that pushes HVAC plants well past design capacity. Multilayer optical film changed that equation. Instead of loading a polyester sheet with dye or metal, 3M Prestige solar film uses hundreds of ultrathin optical layers to reject heat selectively, which is why facility managers evaluating retrofit options keep landing on it.

What the Numbers Actually Mean

Product spec sheets are easy to misread, so it is worth separating the headline metrics before comparing them to a Salt Lake City building’s load profile.

  • TSER (Total Solar Energy Rejected): the share of the full solar spectrum — visible light, infrared, and ultraviolet — that the film stops. 3M Prestige Exterior PR70 stops roughly 50% TSER, and that figure is the honest number to use in cooling-load calculations.
  • IRR (Infrared Rejection): how much of the invisible infrared band the film blocks. For Prestige films, up to 97% of infrared is rejected. This is a real performance figure, but it covers a specific IR range — it is not interchangeable with TSER, and quoting it as total heat rejection overstates the result.
  • UV Rejection: Prestige blocks more than 99% of ultraviolet light, the wavelengths responsible for fading tenant finishes, merchandise, and artwork.
  • VLT (Visible Light Transmittance): how much daylight still passes through. PR70 maintains roughly 70% VLT, which is why the glass does not look tinted from inside or from the street.
  • SHGC (Solar Heat Gain Coefficient): the fraction of solar energy the combined glazing transmits. Adding film drives this number down, and a drop from 0.55 to 0.40 on a west elevation translates directly into smaller peak cooling demand.

The distinction between the 97% IRR figure and the 50% TSER figure matters most during lease negotiations and utility rebates, where evaluators expect the conservative number. A building engineer who quotes IR rejection alone will overpromise; one who quotes TSER will underpromise and still deliver measurable savings.

Why Multilayer Optics Suit Salt Lake City High-rises

Traditional dyed films fade and turn purple within a few Utah summers, and metallized films corrode at the sputtering edges while interfering with cell and radio reception inside the building. Prestige solar film sidesteps both problems because the nanotechnology stack contains no metals at all. For downtown towers full of tenants on their phones, that matters as much as the thermal numbers.

The selective rejection is the second advantage. The film targets infrared wavelengths — the ones carrying the majority of solar heat — while passing most visible light. On a clear January day in Salt Lake City, that means workstations near the glass stay bright without the blinding low-angle glare that follows the sun across the Great Salt Lake in winter. In July, the same stack cuts radiant heat on the west face of the building without the cave-dark interior that a low-VLT dyed tint would create.

Real-world Impact on a High-rise Load Profile

Cooling is the dominant energy cost in a Salt Lake City office tower, and peak demand — not annual consumption — is what sets demand charges with Rocky Mountain Power. When solar gain through glass drops by roughly half on the worst exposures, three things happen:

  • Air handlers on the top floors stop short-cycling during the 3 p.m. peak, when the Oquirrh Mountains sling reflected sun directly into west glazing.
  • Thermostat wars between perimeter and core tenants subside, because perimeter zones no longer swing 8–10 degrees hotter than interior zones.
  • Chilled-water plants run closer to design load instead of past it, extending equipment life and deferring capital replacement.

Facility teams that track submeter data typically see the effect fastest on the top three floors, where roof load and glass load compound. The window retrofit does not touch the roof, yet it relieves the same plant.

3m prestige solar film infographic for Salt Lake City offices
3M Prestige Solar Film Performance Metrics for Salt Lake City High-rises at a glance: office-focused style, glare, privacy, and daylight takeaways for Salt Lake City.

Comparing Prestige to Other Solar Film Options

Not every high-rise needs the same film, and a fair comparison should be made against the alternatives an installer would realistically propose for a Salt Lake City tower.

  • Dyed films: cheapest up front, but they reject heat primarily by absorbing it into the glass, fade quickly at Utah’s elevation and UV intensity, and offer weak IR performance.
  • Metallized films: solid TSER numbers and good glare control, but reflectivity complaints from neighboring towers are common downtown, and the metal layer can degrade on insulated glazing units.
  • Ceramic films: excellent performance with neutral color, often at a higher price point, and a reasonable alternative where brand preference allows.
  • Prestige multilayer film: the best visible-light-to-heat-rejection ratio in the lineup, no metal to corrode or interfere with signals, and a clarity that tenants rarely notice — which is the point.

For a building where preserving views of the Wasatch Front is part of the leasing pitch, Prestige is usually the fit. For utility parking structures or service wings where daylight preservation is irrelevant, a darker, less expensive film may do the job.

Installation Considerations for Tall Buildings

Applying film to a 20-story curtain wall is a logistics exercise as much as a glazing job. Scheduling matters: most towers in Salt Lake City sequence work floor by floor, moving tenants out of affected zones a few days at a time, and exterior-access floors can often be completed without disrupting occupied space at all. Film choice must also be matched to glazing type — dual-pane and low-E units have manufacturer-approved film combinations, and Prestige is among the most widely cleared options for double-pane glass because its low absorption keeps thermal stress low. Working with an experienced installer who documents the glazing make and the film manufacturer’s matching list protects both the warranty on the glass and the warranty on the film. Buildings exploring a full energy upgrade often pair the project with other commercial window tinting measures so tenants experience one coordinated construction window instead of several. See our energy efficient window film options and the 3M window film lineup we install.

Picking the Right Prestige Variant

The Prestige family spans several VLT levels and an exterior-applied version for glass that cannot be reached from inside. As a rule of thumb:

  • PR70 and similar high-VLT variants suit Class A offices where views and daylight are selling points.
  • PR50 and mid-VLT variants fit lobbies, atriums, and skylights that take direct overhead sun, such as the glass canopies common around downtown plazas.
  • Exterior-series films serve spandrel-heavy or interior-access-prohibited elevations, and they handle the cleaning exposure that exterior glass demands.

A shading and load study on the actual elevations — south and west especially — will identify which floors justify the premium variant and which can take a standard one. That kind of targeted installation is how high-rise owners capture most of the savings at a fraction of a whole-building retrofit cost, a pattern consistent with guidance on building envelope upgrades published by the International Window Film Association.

Get a Performance Estimate for Your Building

3M Prestige solar film delivers roughly 50% total solar energy rejection, more than 99% UV blocking, and up to 97% infrared rejection while keeping up to 70% visible light — a combination that fits Salt Lake City high-rises where heat, glare, and views all compete. If you manage a tower downtown, in the Sugar House district, or along the Trax corridor, the team at Commercial Window Tinting Salt Lake will run a film-to-glass match, model the solar heat gain on your worst elevations, and provide a clear quote for 3M Prestige solar film. Contact us today for a consultation and see the performance numbers applied to your building, not just the spec sheet.